Additive
Biopolymer fiber efficient surface treating agent
Dispersing agent200.110.160•160S.170.108•108S.300.350
Anti-sinking agent118•CP-88
Defoaming agent141.052.550.560
Flatting agent306.307.358.706
Anti-skimming agent988
Curing catalyst205
Hammer paint hammer assisting agent66•69
Extinction powderAD-30, DA-3
Water paint and printing ink auxiliary
Dispersing agentAC-87.AC-88.AC-90.AC-100
Defoaming agentAC-202
Flatting agentAC-900
Thickening agentPT-10.PT-30
Sterilization antiseptics TM-8 |
|
Wetting and dispersing agents 200-- similar to 9850 |
Introduction:
Wetting and dispersing agents 200 is applied to solvent-based coating system. Confirmed to SGS Standard, it has good wetting and dispersing effect and is non-toxic. It has a good effect on the hard dispersed organic pigments and inorganic fillers.
Properties:
Composition: Polymer nonionic and anionic compounds
Appearance: Colorless to slightly yellow liquid
Not Volatility: 62—64%(5g 120℃ drying oven 30 minutes)
Refractive index:1.480—1.490(25℃).
Proportion:1.08—1.10
PH:7.5—8
Efficacious component:100%(Not contain solvent)Soluble in alcohol and ether and other organic solvents.
Use:
Non-ionic polymer colloidal protective coating, has good wetting and dispersing effect.
Cationic compounds
Absorption of pigments and inorganic, Can disperse and sequestration of organic matter in the system.This product has a certain antioxidant effect.
Application:
Solvent-based carbon black and organic pigments and inorganic pigments system.
Volume of addition suggested and usage:
Organic pigment:2.0—8.0%
Inorganic pigment:0.5—5.0%
As the capacity of oil absorption and properties differs, the compatibility of the dispersing agent and coating system is different. Before use, please according to the testing of the compatibility to get the best results.
Storage: Keep in a dark, cool and firmly sealed container.
Don’t contact it with water and should be firmly sealed after use.
Safety: This product is a non-dangerous goods, please avoid contact with skin and eyes.
|
|
|
|